Nothing in cart
×
Main Categories
Rubber Flooring
Safety Flooring
Less Than 10 Metres Rubber Flooring Rolls
Wet Room Flooring
Rubber Flooring Rolls
Rubber Bathroom Flooring
Kennel Flooring
Rubber Ice Rink Matting
Electrical Safety Rubber Matting
Classico Rubber Gym Flooring
Entrance Coir Matting Flooring Rolls
Playground Flooring
Industrial Rubber Flooring
Rubber Flooring For Shops
Garage Flooring
Van Flooring
Gym Flooring
Classico Rubber Tiles
Temporary Floor Protection
Commercial Rubber Flooring
Roof Matting
Cable Ramps
Aircraft Wheel Chocks
Wheel Chocks
Site Safety
Industrial Floor Mats
Anti Slip Mats
Temporary Flooring
Retail Commercial And Industrial Flooring
Less Than 10 Metres Rubber Flooring Rolls Cut Lengths
Cable Wire Cover
Rubber Sheet
Commercial Rubber Sheet
Rubber Sheeting Complete 10 Metre Rolls
Sound Proofing & Deadening Sheet
Heavy Duty Rubber Sheet
Premium Rubber Sheet
Rubber Sheetings
Sponge Rubber Sheet
Sound Proofing And Deadening Rubber Sheet
Flexible Clear PVC Sheet
Class O Sheets
Rubber Matting
Entrance Matting
Gym Mats
Rubber Mats for Restaurants And Shops
Rubber Grass Mats
Horse Mats
Anti Fatigue Mats
Industrial Mats
Playground Safety Mats
Ground Reinforcement Mesh
Outdoor Matting
Industrial Safety Mats
Non Slip Rubber for Decking
Pool Mats
Workshop Mats
Van Matting
Rubber Matting Rolls
Logo Mats
Wet Area Matting
Less Than 10 Metres Rubber Matting Rolls Cut Lengths
Rubber Cow Mats
Electrical Safety Matting
Electrical Switchboard Matting
Gymnastic Mats
Premium Rubber Grass Mats
Rubber Pond Liners
Solid Neoprene Rubber Strip
Garage Door Seals
Anti Vibration Matting
Heavy Duty Vinyl Plastic Carpet Protector
Outdoor Carpet
Rubber Gym Mats
Grating
Rubber Play Bark Chippings
Studded Dot Penny Pattern Matting
Gym Mats Commercial
Marquee Matting
Anti Slip GRP Flooring Sheets
Rubber Tiles
Garage Tiles And Flooring
Rubber Floor Tiles
Acoustic Tiles
Promenade Rubber Tiles for Flat Roofs
Interlocking Rubber Flooring Tiles
Floor Paints
Non Slip Floor Paint
Horticulture Products
Horticultural and Ground Reinforcement
Garden Shed Base
Horticulture
PVC Products
PVC Strip
Stair Nosing's
Aluminum Threshold
Metal Cladding Paints
Decorative Paints
Boat & Marine Paint
Line Marking Paints

Metal Cladding Paints

Industrial Heavy Duty Metal Cladding Paints For Farm Sheds And Barns 20Ltr

Industrial Heavy Duty Metal Cladding Paints For Farm Sheds And Barns 20Ltr Description: Metal or structural steel agricultural buildings and barns. Application: Stir well. Easy to apply by brush or roller. If more than one can of a colour is to be used in the same area, intermix before use Size: 5 Litres, 20 Litres & 205 Litres Drying Time: Touch dry 3-6 hours at 15°C Over coating minimum 12-24 hours Technical Data: Volume solids 48.9% D.F.T 25 microns (1 coat) High VOC Content 25-50% VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product (Cat A/d): 400 g/l (2007)/300 g/l (2010). This product contains max 300 g/l VOC. Coverage: Theoretical spread rate 13/17 sq metres/litres (depending on the porosity and age of the surface being coated) Standard Colour Range: Black, Dove Grey, Dutch Blue, Emerald Green, Red Oxide, Slate Grey An extensive choice of colours available from the RAL/B.S range. General Info: Our metal cladding paints for farm sheds & barns is a heavy duty, solvent-borne protective finish coating formulated for interior and exterior use. With excellent covering properties, the key advantages of this product are that it delivers an attractive semi-gloss finish that combines excellent opacity with outstanding durability making it highly resistant to inclement weather. It is ideally suited for the long term protection of metal or structural steel agricultural buildings and barns. Preparation: All surfaces to be painted should be clean, dry and free from loose and flaking material When painting iron and steel, remove all mill scale and rust Prime bare surfaces with the appropriate primer Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly Wear a suitable face mask when dry sanding Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Cleaning: Remove as much product as possible from the equipment used to apply the coating before cleaning Replace lid firmly Clean equipment immediately after use with white spirit or paint cleaner Some local authorities have special facilities for the disposal of waste coatings Do not empty product into drains or watercourses. Precautions This paint product is flammable Contains Cobalt Carboxylate and Ethyl Methyl Ketoxime May produce an allergic reaction. Keep away from sources of ignition No smoking Repeated exposure may cause skin dryness or cracking Ensure maximum ventilation during application and drying Avoid contact with skin and eyes In case of contact with eyes, rinse immediately with plenty of water and seek medical advice After contact with skin, wash immediately with plenty of soap and water or a recognised skin cleaner Do not use solvent or thinners Restrict interior use to small surface areas. Not recommended for interior use on large surface areas in confined spaces If swallowed, seek medical advice immediately and show the container or label

More Details


£ 161.99 INC.
VAT

Heavy Duty Industrial Metal Cladding Paints For Sheds And Barns 5Ltr

Heavy Duty Industrial Metal Cladding Paints For Sheds And Barns 5Ltr Description: Metal or structural steel agricultural buildings and barns. Application: Stir well. Easy to apply by brush or roller. If more than one can of a colour is to be used in the same area, intermix before use Size: 5 Litres, 20 Litres & 205 Litres Drying Time: Touch dry 3-6 hours at 15°C Over coating minimum 12-24 hours Technical Data: Volume solids 48.9% D.F.T 25 microns (1 coat) High VOC Content 25-50% VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product (Cat A/d): 400 g/l (2007)/300 g/l (2010). This product contains max 300 g/l VOC. Coverage: Theoretical spread rate 13/17 sq metres/litres (depending on the porosity and age of the surface being coated) Standard Colour Range: Black, Dove Grey, Dutch Blue, Emerald Green, Red Oxide, Slate Grey An extensive choice of colours available from the RAL/B.S range. General Info: Our metal cladding paints for farm sheds & barns is a heavy duty, solvent-borne protective finish coating formulated for interior and exterior use. With excellent covering properties, the key advantages of this product are that it delivers an attractive semi-gloss finish that combines excellent opacity with outstanding durability making it highly resistant to inclement weather. It is ideally suited for the long term protection of metal or structural steel agricultural buildings and barns. Preparation: All surfaces to be painted should be clean, dry and free from loose and flaking material When painting iron and steel, remove all mill scale and rust Prime bare surfaces with the appropriate primer Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly Wear a suitable face mask when dry sanding Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Cleaning: Remove as much product as possible from the equipment used to apply the coating before cleaning Replace lid firmly Clean equipment immediately after use with white spirit or paint cleaner Some local authorities have special facilities for the disposal of waste coatings Do not empty product into drains or watercourses. Precautions This paint product is flammable Contains Cobalt Carboxylate and Ethyl Methyl Ketoxime May produce an allergic reaction. Keep away from sources of ignition No smoking Repeated exposure may cause skin dryness or cracking Ensure maximum ventilation during application and drying Avoid contact with skin and eyes In case of contact with eyes, rinse immediately with plenty of water and seek medical advice After contact with skin, wash immediately with plenty of soap and water or a recognised skin cleaner Do not use solvent or thinners Restrict interior use to small surface areas. Not recommended for interior use on large surface areas in confined spaces If swallowed, seek medical advice immediately and show the container or label  

More Details


£ 80.39 INC.
VAT

205Ltr Industrial Heavy Duty Metal Cladding Paints For Sheds And Barns

205Ltr Industrial Heavy Duty Metal Cladding Paints For Sheds And Barns 5Ltr Description: Metal or structural steel agricultural buildings and barns. Application: Stir well. Easy to apply by brush or roller. If more than one can of a colour is to be used in the same area, intermix before use Size: 5 Litres, 20 Litres & 205 Litres Drying Time: Touch dry 3-6 hours at 15°C Over coating minimum 12-24 hours Technical Data: Volume solids 48.9% D.F.T 25 microns (1 coat) High VOC Content 25-50% VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product (Cat A/d): 400 g/l (2007)/300 g/l (2010). This product contains max 300 g/l VOC. Coverage: Theoretical spread rate 13/17 sq metres/litres (depending on the porosity and age of the surface being coated) Standard Colour Range: Black, Dove Grey, Dutch Blue, Emerald Green, Red Oxide, Slate Grey An extensive choice of colours available from the RAL/B.S range. General Info: Our metal cladding paints for farm sheds & barns is a heavy duty, solvent-borne protective finish coating formulated for interior and exterior use. With excellent covering properties, the key advantages of this product are that it delivers an attractive semi-gloss finish that combines excellent opacity with outstanding durability making it highly resistant to inclement weather. It is ideally suited for the long term protection of metal or structural steel agricultural buildings and barns. Preparation: All surfaces to be painted should be clean, dry and free from loose and flaking material When painting iron and steel, remove all mill scale and rust Prime bare surfaces with the appropriate primer Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly Wear a suitable face mask when dry sanding Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Cleaning: Remove as much product as possible from the equipment used to apply the coating before cleaning Replace lid firmly Clean equipment immediately after use with white spirit or paint cleaner Some local authorities have special facilities for the disposal of waste coatings Do not empty product into drains or watercourses. Precautions This paint product is flammable Contains Cobalt Carboxylate and Ethyl Methyl Ketoxime May produce an allergic reaction. Keep away from sources of ignition No smoking Repeated exposure may cause skin dryness or cracking Ensure maximum ventilation during application and drying Avoid contact with skin and eyes In case of contact with eyes, rinse immediately with plenty of water and seek medical advice After contact with skin, wash immediately with plenty of soap and water or a recognised skin cleaner Do not use solvent or thinners Restrict interior use to small surface areas. Not recommended for interior use on large surface areas in confined spaces If swallowed, seek medical advice immediately and show the container or label  

More Details


£ 1,541.99 INC.
VAT

Commercial 20Ltr White Spirit Modified Alkyd Based Metal Grip Primer For Plant Machinery

Commercial 20Ltr White Spirit Modified Alkyd Based Metal Grip Primer For Plant Machinery Description: Ideal for use on steel structures, plant machinery, skips, metal bins and construction frame work Application: Airless spray, conventional spray, brush or roller. Size: 5 Litres, 20 Litres & 205 Litres Drying Time: Touch dry 6-8 hours at 20°C Dry to handle after 12 hours Over coating minimum 10 hours Technical Data: Volume solids 53% D.F.T 40 microns one coat, can be built to120/160 microns over 3 coats Coverage: Theoretical spread rate 10 sq metres/litres Standard Colour Range: Red oxide, grey, white, buff, green, black An extensive choice of colours available from the RAL/B.S range. Further Info: Marlcoat white spirit modified alkyd based metal grip primer is a single pack high build coating. This product provides an extremely versatile and durable coating and is ideal for use on new construction projects. Suitable as a primer finish and for complete application in a fabrication works environment and for dry internals walls of buildings. Proven resistance to undercutting from damage points and can be over coated with any of our alkyd and polyurethane systems.  

More Details


£ 140.39 INC.
VAT

Industrial 5Ltr White Spirit Modified Alkyd Based Metal Grip Primer For Steel Structures

Industrial 5Ltr White Spirit Modified Alkyd Based Metal Grip Primer For Steel Structures Description: Ideal for use on steel structures, plant machinery, skips, metal bins and construction frame work Application: Airless spray, conventional spray, brush or roller. Size: 5 Litres, 20 Litres & 205 Litres Drying Time: Touch dry 6-8 hours at 20°C Dry to handle after 12 hours Over coating minimum 10 hours Technical Data: Volume solids 53% D.F.T 40 microns one coat, can be built to120/160 microns over 3 coats Coverage: Theoretical spread rate 10 sq metres/litres Standard Colour Range: Red oxide, grey, white, buff, green, black An extensive choice of colours available from the RAL/B.S range. Further Info: Marlcoat white spirit modified alkyd based metal grip primer is a single pack high build coating. This product provides an extremely versatile and durable coating and is ideal for use on new construction projects. Suitable as a primer finish and for complete application in a fabrication works environment and for dry internals walls of buildings. Proven resistance to undercutting from damage points and can be over coated with any of our alkyd and polyurethane systems.  

More Details


£ 67.19 INC.
VAT

205Ltr Industrial White Spirit Modified Alkyd Based Metal Grip Primer For Machinery

205Ltr Industrial White Spirit Modified Alkyd Based Metal Grip Primer For Machinery Description: Ideal for use on steel structures, plant machinery, skips, metal bins and construction frame work Application: Airless spray, conventional spray, brush or roller. Size: 5 Litres, 20 Litres & 205 Litres Drying Time: Touch dry 6-8 hours at 20°C Dry to handle after 12 hours Over coating minimum 10 hours Technical Data: Volume solids 53% D.F.T 40 microns one coat, can be built to120/160 microns over 3 coats Coverage: Theoretical spread rate 10 sq metres/litres Standard Colour Range: Red oxide, grey, white, buff, green, black An extensive choice of colours available from the RAL/B.S range. Further Info: Marlcoat white spirit modified alkyd based metal grip primer is a single pack high build coating. This product provides an extremely versatile and durable coating and is ideal for use on new construction projects. Suitable as a primer finish and for complete application in a fabrication works environment and for dry internals walls of buildings. Proven resistance to undercutting from damage points and can be over coated with any of our alkyd and polyurethane systems.  

More Details


£ 1,391.99 INC.
VAT

Industrial Metal Grip Barrier Primer For Metal Work 20Ltr

Industrial Metal Grip Barrier Primer For Metal Work 20Ltr Description: A cost-effective and eco friendly coating for all types of metal work such as skips, bins, steel construction and metal frame work. Application: Airless spray, conventional spray, brush or roller. Size: 5 Litres, 20 Litres & 205 Litres Drying Time: 35 minutes at 20°C Dry to handle in 1 hour Recoat, minimum 1 hour Technical Data: Volume solids 53% DFT 40 microns in one coat - can be built up to 120/160 microns in 3 coats Coverage: Theoretical spread rate 10 sq metres/litres Standard Colour Range: Black, Buff, Green, Grey, Red and White An extensive choice of colours available from the RAL/B.S range. General Info:  metal grip barrier primer is a cost effective single pack, fast drying high build modified alkyd primer for both new and old metal surfaces and is ideal as a versatile primer finish for a complete application in metal fabrication. Readily available in a wide range of colours, this product works well on dry internal structures of buildings and provides good resistance to undercutting from damage points. One of the key advantages of  metal grip barrier primer is that it can be over coated with chlorinated rubber and other alkyd systems as well as the polyurethane products found on this site. It can also be used as a primer beneath intumescent coatings.  

More Details


£ 172.79 INC.
VAT

5Ltr Industrial Metal Grip Barrier Primer For Metal Work Skips & Bins

5Ltr Industrial Metal Grip Barrier Primer For Metal Work Skips & Bins Description: A cost-effective and eco friendly coating for all types of metal work such as skips, bins, steel construction and metal frame work. Application: Airless spray, conventional spray, brush or roller. Size: 5 Litres, 20 Litres & 205 Litres Drying Time: 35 minutes at 20°C Dry to handle in 1 hour Recoat, minimum 1 hour Technical Data: Volume solids 53% DFT 40 microns in one coat - can be built up to 120/160 microns in 3 coats Coverage: Theoretical spread rate 10 sq metres/litres Standard Colour Range: Black, Buff, Green, Grey, Red and White An extensive choice of colours available from the RAL/B.S range. General Info:  metal grip barrier primer is a cost effective single pack, fast drying high build modified alkyd primer for both new and old metal surfaces and is ideal as a versatile primer finish for a complete application in metal fabrication. Readily available in a wide range of colours, this product works well on dry internal structures of buildings and provides good resistance to undercutting from damage points. One of the key advantages of  metal grip barrier primer is that it can be over coated with chlorinated rubber and other alkyd systems as well as the polyurethane products found on this site. It can also be used as a primer beneath intumescent coatings.  

More Details


£ 76.79 INC.
VAT

205Ltr Industrial Metal Grip Barrier Primer For Steel Construction And Metal Frame Work

205Ltr Industrial Metal Grip Barrier Primer For Steel Construction And Metal Frame Work Description: A cost-effective and eco friendly coating for all types of metal work such as skips, bins, steel construction and metal frame work. Application: Airless spray, conventional spray, brush or roller. Size: 5 Litres, 20 Litres & 205 Litres Drying Time: 35 minutes at 20°C Dry to handle in 1 hour Recoat, minimum 1 hour Technical Data: Volume solids 53% DFT 40 microns in one coat - can be built up to 120/160 microns in 3 coats Coverage: Theoretical spread rate 10 sq metres/litres Standard Colour Range: Black, Buff, Green, Grey, Red and White An extensive choice of colours available from the RAL/B.S range. General Info:  metal grip barrier primer is a cost effective single pack, fast drying high build modified alkyd primer for both new and old metal surfaces and is ideal as a versatile primer finish for a complete application in metal fabrication. Readily available in a wide range of colours, this product works well on dry internal structures of buildings and provides good resistance to undercutting from damage points. One of the key advantages of  metal grip barrier primer is that it can be over coated with chlorinated rubber and other alkyd systems as well as the polyurethane products found on this site. It can also be used as a primer beneath intumescent coatings.  

More Details


£ 1,425.59 INC.
VAT
Showing 1-9 of 9 items.

Metal Cladding Paints

our clients:
We’re Always Here To Help
Reach out to us through any of these support channels